Skip to main content

Posts

Showing posts with the label 03

Rockwell test procedure.

INFORMATION. Rockwell hardness test, a differential-depth method, the residual depth of the indent made by the indenter is measured.  The deeper a defined indenter penetrates at a defined test force into the surface of a workpiece (specimen), the softer the tested material. In the Rockwell method, the total test force is applied in two stages. This allows the impact of specimen surface roughness (e.g. grooves in the specimen) and measuring errors caused by backlash in indentation depth measurement to be eliminated. THE INDIVIDUAL ROCKWELL METHODS ARE DISTINGUISHED FROM EACH OTHER AND. The five resulting Rockwell methods use five different indenters (diamond cone with 120 o  curvature or a hard metal ball made from tungsten carbide with diameters of: 1/16",1/8",1/4",1/2") and six different total test forces (15, 30, 45, 60, 100, 150 kgf).. This results in 30 different - standardised according to ISO 6508 and ASTM E18 – Rockwell scales (e.g. A, B, C, 30N, ...